Read Community Name: Specify the password for access the SNMP community for read only
access.
Set Community Name: Specify the password for access to the SNMP community with read/write
access.
System Location: Specify the location of the device.
System Contact: Specify the contact details of the device.
Trap Active: Choose to enable or disable the SNMP trapping feature. .
Trap Manager IP: Specify the password for the SNMP trap community.
Trap Community: Specify the name of SNMP trap community.
Schedule
This screen allows users to set schedules on the access point and also to schedule the time for
Power Saving Mode.
Event Log
This screen allows users to view a running log of the access point system statistics, events and
activities.
To Next Page
Loading...
