Diagnosis
Diagnosis screen allows users to check whether a network destination is reachable with
ping service.
Firmware
This page allows you to upgrade the access point’s firmware. To upgrade the firmware of your you
need to download the firmware file to your local hard disk, and enter that file name and path in the
appropriate field on this page. You can also use the Browse button to find the firmware file on your
PC.
Backup
This page allows you to save the current configurations. When you save the configurations, you also
can re-load the saved configurations into the access point through the Restore Settings. If extreme
problems occur you can use the Restore to Factory Defaults to set all configurations to its original
default settings.
To Next Page
Loading...
Need help?
General
