Triple E EMPRESS SERIES - 4 Controls; Chassis Controls; Dash Controls

4-1
4 CONTROLS
It is the responsibility of each owner, operator,
driver or user to be familiar with the positions, func-
tions and settings of all controls. Each new person
should be trained in all aspects of motorhome
operation prior to starting. Review this section as
often as required to understand the controls. Con-
tact your dealer if you have any other questions.
4.1 CHASSIS CONTROLS
Refer to the manual provided in the information
package from the chassis manufacturers for details
on the standard automotive, steering column,
transmission and instrument cluster controls, lights
and gauges.
RIGHT SIDE - LOWER
NSTRUMENTS
EMPRESS
a
b
c
4.2 DASH CONTROLS
1. Right Side:
a. Ignition Key:
This standard automotive 4 position rotary
switch controls the ignition and electrical
system for the engine and control func-
tions.
• Turn to the most counterclockwise
position to turn the power on to the
auxiliary control functions.
• Turn to the fi rst clockwise detent for
OFF where the engine and all electri
cal power has been turned off to the
instruments.
• Turn to the second clockwise detent
for RUN. This is the normal engine
running position.
• Turn against the last spring loaded
detent to engage the starter. Release
the key when the engine starts and it