25
2. Web Configuration Interface
2.4.2 Backup/Restore
Using the Backup/Restore function in the Configuration sections toolbar, you can back up all configuration data and restore it at a later date.
To back up data:
1. In the toolbar, click on the
icon. The Backup/Restore Data page appears.
2. In the Backup to file field, click the Browse button to open up the Enter file name to backup to screen.
3. Navigate to the location on your computer where you want to save the backup file, and then give it an appropriate file name and click
the Open button. Backup files are saved in the .64b format.
4. The Backup/Restore Data screen reappears with the newly saved location and file name populating the Backup to file field. Click on the
Backup button.
5. Upon completion of the backup, click the Close button to close the Backup/Restore Data screen.
To Next Page
Loading...
