Triton Electronics AMV3500 - Page 42

© Triton Electronics Ltd 2022 Doc. AMV35003_1.doc v1.04 PAGE 42 OF 52
8
Start a welding arc, if there is a pulse
on the current channel the values will
be shown here.
Press OSCILOSCOPE
9
The AMV now displays the welding
waveform
To look at the waveform while
recording, press PAUSE,
then use the graph tools to zoom in
Press DIGITAL to return to the digital
screen
10
Here you can see the display has been
zoomed in to show 1 wavefrom.
Press DIGITAL to return to the digital
screen.
Stop the welding arc
11
To do a PASS COMPLETE press