Triumph Daytona Moto2 765 2020 User Manual

Cleaning and Storage
148
Care of Leather Products
It is recommend that the leather
products are periodically cleaned with a
damp cloth and allowed to dry naturally
at room temperature. This will maintain
the appearance of the leather and
ensure the long life of the product.
The Triumph leather product is a natural
product and lack of care can result in
damage and permanent wear.
Follow these simple instructions to
prolong the life of the leather product:
• Do not use household cleaning
products, bleach, detergents
containing bleach or any kind of
solvent to clean the leather product.
• Do not immerse the leather product
in water.
• Avoid direct heat from fires and
radiators which can dry out and
distort the leather.
• Do not leave the leather product in
direct sunlight for prolonged periods
of time.
• Do not dry the leather product by
applying direct heat to it at any
time.
• If the leather product does get wet,
absorb any excess water with a soft
clean cloth then leave the leather
product to dry naturally at room
temperature.
• Avoid exposure of the leather
product to high levels of salt, for
example sea/salt water or road
surfaces that have been treated
during the winter for ice and snow.
• If exposure to salt is unavoidable,
clean the leather product
immediately after each exposure
using a damp cloth then leave the
leather product to dry naturally at
room temperature.
• Gently clean any minor marks with a
damp cloth then leave the leather
product to dry naturally at room
temperature.
• Place the leather product in a fabric
bag or cardboard box to protect it
when in storage. Do not use a
plastic bag.

Triumph Daytona Moto2 765 2020 Specifications

General

Engine Type	Liquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Engine Capacity	765 cc
Compression Ratio	12.9:1
Max Torque	80 Nm @ 9, 750 rpm
Transmission	6-speed
Frame	Aluminium beam twin spar
Dry Weight	165 kg
Seat Height	825 mm
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR17
Max Power	130 PS / 128 bhp (95.6 kW) @ 12, 250 rpm
Front Suspension	Öhlins NIX30 upside down forks, adjustable compression and rebound damping, and preload adjustment
Rear Suspension	Öhlins TTX36 twin tube monoshock, adjustable preload, rebound and compression damping
Rear Brakes	Single 220mm disc, Brembo single piston caliper
Bore x Stroke	78.0mm x 53.4mm