EasyManuals Logo

Triumph Daytona Moto2 765 2020 User Manual

Triumph Daytona Moto2 765 2020
163 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
General Information
48
Screen Contrast
The Screen Contrast information tray
allows the display screen contrast to be
adjusted.
HIGH CONTRAST
AUTO CONTRAST
There are two options available:
HIGH CONTRAST - This option locks
the display screen to the white
background version of each display
screen for maximum visibility during
the day.
AUTO CONTRAST - This option uses
the instrument light sensor to
adjust the contrast to the most
suitable setting. In bright sunlight,
low brightness settings will be
overriden to make sure that the
instruments can be viewed at all
times.
If the rider defined brightness setting is
suitable this will be used, see page54.
Note
Do not cover the light sensor on the
display screen as this will stop the
screen brightness and contrast from
working correctly.
Style Options
The Style Options information tray
allows a different style to be applied to
the display screen.
STYLE 01
STYLE 02
STYLE 03
3
2
1
Style 2 Option Selected
To select a different style:
Push the joystick down/up to select
the required style.
Press the joystick centre to confirm.
Lap Timer
The Lap Timer information tray allows a
certain distance/lap to be timed and
compared against a previously timed
lap.
THIS LAP PREV.LAP mph
03:59 04:02.9 60.0
To start a lap (THIS LAP):
Briefly press the joystick down/up
or centre, the counter will start to
count the first lap.
Pressing joystick down/up or centre
will start a new lap, and the
previous lap’s time and average
speed will be shown in the tray
(PREV.LAP) next to the new lap time.
A long press (longer than two
seconds) of the joystick down/up or
centre will stop the lap timer, clear
the stored data and start a new lap
time.
The stored lap data can be seen
from the Main Menu. For more
information, see page57.
Main Menu
To access the Main menu:
The motorcycle must be stationary
with the ignition switched on.
Press the HOME button on the right
handlebar switch housing.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Daytona Moto2 765 2020 and is the answer not in the manual?

Triumph Daytona Moto2 765 2020 Specifications

General IconGeneral
Engine TypeLiquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Engine Capacity765 cc
Compression Ratio12.9:1
Max Torque80 Nm @ 9, 750 rpm
Transmission6-speed
FrameAluminium beam twin spar
Dry Weight165 kg
Seat Height825 mm
Front Tire120/70 ZR17
Rear Tire180/55 ZR17
Max Power130 PS / 128 bhp (95.6 kW) @ 12, 250 rpm
Front SuspensionÖhlins NIX30 upside down forks, adjustable compression and rebound damping, and preload adjustment
Rear SuspensionÖhlins TTX36 twin tube monoshock, adjustable preload, rebound and compression damping
Rear BrakesSingle 220mm disc, Brembo single piston caliper
Bore x Stroke78.0mm x 53.4mm

Related product manuals