EasyManuals Logo

Triumph Speed Triple R Handbook

Triumph Speed Triple R
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #110 background imageLoading...
Page #110 background image
110
Maintenance and Adjustment
Warning
When replacement tyres are required,
consult your authorised Triumph dealer
who will arrange for the tyres to be
selected, in a correct combination, from the
approved list and fitted according to the
tyre manufacturer's instructions.
When tyres are replaced, allow time for the
tyres to seat to the rim (approximately
24 hours). During this seating period, ride
cautiously as an incorrectly seated tyre
could cause loss of control or an accident.
Initially, the new tyres will not produce the
same handling characteristics as the worn
tyres and the rider must allow adequate
riding distance (approximately 100 miles)
to become accustomed to the new
handling characteristics.
24 hours after fitting, the tyre pressures
must be checked and adjusted, and the
tyres examined for correct seating.
Rectification must be carried out as
necessary.
The same checks and adjustments must
also be carried out when 100 miles have
been travelled after fitting.
Warning
Use of a motorcycle with incorrectly seated
tyres, incorrectly adjusted tyre pressures, or
when not accustomed to its handling
characteristics may lead to loss of control
and an accident.
Warning
Tyres that have been used on a rolling
road dynamometer may become
damaged. In some cases, the damage may
not be visible on the external surface of the
tyre. Tyres must be replaced after such use
as continued use of a damaged tyre may
lead to instability, loss of control and an
accident.
Warning
Accurate wheel balance is necessary for
safe, stable handling of the motorcycle. Do
not remove or change any wheel balance
weights. Incorrect wheel balance may
cause instability leading to loss of control
and an accident.
When wheel balancing is required, such as
after tyre replacement, see your authorised
Tri ump h d eal er.
Only use self-adhesive weights. Clip-on
weights may damage the wheel and tyre
resulting in tyre deflation, loss of control
and an accident.

Table of Contents

Other manuals for Triumph Speed Triple R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Speed Triple R and is the answer not in the manual?

Triumph Speed Triple R Specifications

General IconGeneral
Engine Capacity1050 cc
Transmission6-speed
Seat Height825 mm
Fuel SystemMultipoint sequential electronic fuel injection
Engine TypeLiquid-cooled, 12-valve, inline 3-cylinder
Power148 hp (110 kW) @ 10, 500 rpm
Torque117 Nm at 7, 150 rpm
Front SuspensionÖhlins 43mm NIX30 upside down forks with adjustable preload, rebound and compression damping
Rear SuspensionÖhlins TTX36 monoshock, fully adjustable
Front BrakesTwin 320mm floating discs, Brembo 4-piston radial calipers
Fuel Tank Capacity15.5 litres

Related product manuals