Triumph Speed Triple R Handbook

98
Maintenance and Adjustment
Front Suspension
Front Fork Inspection
Examine each fork for any sign of damage,
scratching of the slider surface, or for oil
leaks.
If any damage or leakage is found, consult an
authorised Triumph dealer.
To check that the forks operate smoothly:
• Position the motorcycle on level
ground.
• While holding the handlebars and
applying the front brake, pump the
forks up and down several times.
• If roughness or excessive stiffness is
detected, consult your authorised
Triumph dealer.
Note:
• The suspension movement will be
affected by adjustment settings.
Warning
Riding the motorcycle with defective or
damaged suspension is dangerous and
may lead to loss of control and an accident.
Warning
Never attempt to dismantle any part of the
suspension units, as all units contain
pressurised oil. Skin and eye damage can
result from contact with the pressurised oil.

Triumph Speed Triple R Specifications

General

Engine Capacity	1050 cc
Transmission	6-speed
Seat Height	825 mm
Fuel System	Multipoint sequential electronic fuel injection
Engine Type	Liquid-cooled, 12-valve, inline 3-cylinder
Power	148 hp (110 kW) @ 10, 500 rpm
Torque	117 Nm at 7, 150 rpm
Front Suspension	Öhlins 43mm NIX30 upside down forks with adjustable preload, rebound and compression damping
Rear Suspension	Öhlins TTX36 monoshock, fully adjustable
Front Brakes	Twin 320mm floating discs, Brembo 4-piston radial calipers
Fuel Tank Capacity	15.5 litres