Triumph Speed Triple R Handbook

104
Maintenance and Adjustment
Speed Triple R
1. Rebound damping adjuster
The rebound damping adjuster is accessible
from the left hand side of the motorcycle. It is
coloured black and is situated close to the
rear suspension reservoir.
To adjust the rebound damping setting,
rotate the adjuster clockwise to increase
rebound damping and anti-clockwise to
decrease. Always count the number of clicks
anti-clockwise from the fully clockwise
position noting that the first stop (click
position) is counted as zero.
Note:
• The motorcycle is delivered from
the factory with the rebound
adjuster set at 10 clicks from the
fully clockwise position.
Compression Damping Adjustment
Speed Triple
1. Compression damping adjuster
The compression damping adjuster is
situated below the rear suspension unit
reservoir.
To adjust the compression damping setting,
rotate the slotted adjuster clockwise to
increase, or anti-clockwise to decrease.
Always count the number of anti-clockwise
turns from the fully clockwise position.
Note:
• The motorcycle is delivered from
the factory with the compression
damping set at 1.0 anti-clockwise
turns from the fully clockwise
position.
1
chcx
1
cgfb

Triumph Speed Triple R Specifications

General

Engine Capacity	1050 cc
Transmission	6-speed
Seat Height	825 mm
Fuel System	Multipoint sequential electronic fuel injection
Engine Type	Liquid-cooled, 12-valve, inline 3-cylinder
Power	148 hp (110 kW) @ 10, 500 rpm
Torque	117 Nm at 7, 150 rpm
Front Suspension	Öhlins 43mm NIX30 upside down forks with adjustable preload, rebound and compression damping
Rear Suspension	Öhlins TTX36 monoshock, fully adjustable
Front Brakes	Twin 320mm floating discs, Brembo 4-piston radial calipers
Fuel Tank Capacity	15.5 litres