Maintenance
97
The bar end mirrors will be set by your
dealer and will not normally require any
adjustment. Should adjustment be
necessary, do not rotate the mirror
beyond 75°, measured from the vertical
section of the mirror arm.
1. Mirror arm vertical section
Steering/Wheel Bearings
Warning
To prevent risk of injury from the
motorcycle falling during the
inspection, make sure that the
motorcycle is stabilized and secured on
a suitable support.
Do not exert extreme force against
each wheel or rock each wheel
vigorously as this may cause the
motorcycle to become unstable and
cause injury by falling from its support.
Make sure that the position of the
support block will not cause damage to
the motorcycle.
Steering Inspection
Lubricate and inspect the condition of
the steering (headstock) bearings in
accordance with scheduled
maintenance requirements.
To Next Page
Loading...
