FUNCTION BUTTON:
MODE: This key lets you to select a particular function you want.
AUTO ON/OFF: The system turns on when any key is pressed or when it receives an input
from the speed sensor. The processor turns off automatically when the
speed sensor has no signal input or no key is pressed for approximately 4
minutes.
RESET: The unit can be reset by changing the batteries or pressing the MODE key
for 3 seconds.
PRESET TIME, DISTANCE: Automatic display of the following functions in the order shown:
TIME > SPEED > DISTANCE.
FUNCTIONS AND OPERATIONS:
SCAN: To choose the scan mode, press the MODE key until the arrow indicates the
selection and ashes.
TIME: The time of exercise will be displayed by pressing MODE key until the arrow
is set to time.
SPEED: Current speed will be shown by pressing MODE key until the arrow is set to
speed.
DISTANCE: The distance of each workout will be displayed by pressing MODE key until
DST appears.
BATTERY: This monitor uses one battery. If the display stops working replace
the battery.
COMPUTER FUNCTIONS
SPECIFICATIONS:
TIME (TMR) 00:00 - 99:59
SPEED (SPD) 0.0 - 99.9 KM/H or MI/H
DISTANCE (DST) 0.00 - 999.9 KM
To Next Page
Loading...
