EasyManua.ls Logo

Trojan TR 100 - Exercise Instructions; Cool Down Phase; Muscle Toning Guidance; Weight Loss Strategy

Trojan TR 100
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
TR100 - T
EXERCISE INSTRUCTIONS
This stage is to let your Cardiovascular System and muscles wind down. This is a repeat of the warm up
exercise e.g. reduce your tempo, continue for approximately 5 minutes. The stretching exercises should now
be repeated, again remembering not to force or jerk your muscles into the stretch.
As you get tter you may need to train longer and harder. It is advisable to train at least three times a week,
and if possible space your workouts evenly throughout the week.
MUSCLE TONING
To tone muscle while on your Treadmill you will need to have the resistance set quite high. This will
put more strain on your leg muscles and may mean you cannot train for as long as you would like. If you are
also trying to improve your tness, you need to alter your training program. You should train as normal
during the warm up and cool down phases, but towards the end of the exercise phase you should increase
resistance, making your legs work harden than normal. You may have to reduce your speed to keep your
heart rate in the target zone.
WEIGHT LOSS
The important factor here is the amount of effort you put in. The harder and longer you work the more
calories you will burn.
USE
The tension control knob allows you to alter the resistance of the pedals. A high resistance makes it
more difcult to pedal, a low resistance makes it easier. For the best results set the tension while the bike
is in use.
WARM UP STAGE
Please consult with your doctor or professional person before use.
Before you use the motorized treadmill, please learn how to control the machine. It is important to
understand how to start the machine, stop the machine and how to adjust the speed of the machine. After
that, you can begin using the treadmill. Stand on anti-slip pads located on both sides of the running deck
and hold the handle bar with both hands. Keep the machine at the low speed about 1.6~3.2 km/h, then test
the running machine speed by using one foot. Once you are used to the speed, then you can run on the
machine and you can add the speed between 3 and 5 km/h. Keep the speed about 10 minutes,
then stop the machine.

Related product manuals