EasyManua.ls Logo

Trojan TR 300 - Maintenance Guide; Cleaning and Storage; Running Belt Adjustment; Belt and Deck Lubrication Schedule

Trojan TR 300
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
MAINTENANCE
CLEANING
The Trojan TR 300 Treadmill can be cleaned with a soft cloth and mild detergent. Do not use abrasives or
solvents on plastic parts. Wipe any perspiration off the Trojan TR 300 Treadmill
after each use.
STORAGE
Store the Trojan TR 300 Treadmill in a clean and dry environment away from children.
RUNNING BELT ADJUSTMENT
WARNING: ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE CLEANING OR
SERVICING THE UNIT.
Keep treadmill clean by dusting regularly. Be sure to clean the exposed part of the deck on either side of the
walking belt and the side rails. This reduces the build-up of foreign material underneath the walking belt by
wearing clean running shoes.
Warning: Always unplug the treadmill from the electrical outlet before removing the motor cover. At least once
a year remove the motor cover and vacuum under the motor cover.
RUNNING BELT AND DECK LUBRICATION
This treadmill is equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction may play
a major role in the function and life of your treadmill, thus requiring periodic lubrication. We recommend
DSHULRGLFLQVSHFWLRQRIWKHGHFN<RXQHHGFRQWDFWZLWKRXUVHUYLFHFHQWUHLI\RXëQGWKHGDPDJHRIWKHGHFN
We recommend lubrication of the deck according to the following timetable:
Light user (less than 3 hours/ week) annually
Medium user (3-5 hours/ week) every six months
Heavy user (more than 5 hours/ week) every three months
We recommend that you buy the lubrication from our distributor or directly from our company.
Attention: Any repair needs a professional technician.
1. We suggest that you should switch off the power for 10 minutes after keep running 2 hours, so that it’s
good for maintain the treadmill.
2. To avoid slipping during running, the belt should not be loose; for avoiding the more abrasion between the
roller and belt and maintain the machine’s good running, the belt should be not too tight. You can adjust
the distance between deck and belt, the belt should be away from the deck about 50 - 75 mm on both
sides, it’s the best not too tight and loose.
W
e suggest that
y
ou should switch off the power for 10 minutes after keep running 2 hours, so that it’s
good for ma
i
nta
i
n the treadm
i
ll.

Related product manuals