Trojan TR310 - Running Belt Centering Procedure

30
CENTRE THE RUNNING BELT
Place the treadmill on a level surface. Run the treadmill at
approximately 6-8 KM/H, checking the running condition.
If the belt has drifted to the right, pull out of the save
clock and switch, turn the right adjusting bolt 1/4 turn
clockwise, then start running until centring the belt.
PIC A
If the belt has drifted to the left, pull out of the safety
clock and switch, turn the left adjusting bolt 1/4 turn
clockwise, then start running until centring the belt.
PIC B
Ensure running belt is secured tight enough to allow for
an easy running experience. Pull out of the safety clock
and switch, turn the left and right adjusting bolt 1/4 turn
clockwise, then re-start running, in order to conrm the
running belt is secured and fastened adequately.
PIC C

MAINTENANCE
#22M07T003 TR310 TREADMILL - USER MANUAL.indd 30 2022/08/29 3:27 PM