29
MAINTENANCE
CLEANING
The Treadmill can be cleaned with a soft cloth and mild detergent. Do not use abrasives or solvents on plastic
parts. Wipe any perspiration off after each use.
STORAGE
Store the Treadmill in a clean and dry environment away from children.
RUNNING BELT ADJUSTMENT
WARNING: ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE CLEANING
OR SERVICING THE UNIT.
Keep treadmill clean by wiping clean with soap and water regularly. Be sure to clean the exposed part of
the deck on either side of the walking belt and the side rails. This reduces the build-up of foreign material
underneath the walking belt.
Warning: Always unplug the treadmill from the electrical outlet before removing the motor cover. At least once
a year remove the motor cover and vacuum under the motor cover.
RUNNING BELT AND DECK LUBRICATION
This treadmill is equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction may
play a major role in the function and life of your treadmill, thus requiring periodic lubrication. We recommend a
periodic inspection of the deck.
We recommend lubrication of the deck according to the following timetable:
• Light user: Annually
• Medium user: Once every six months
• Heavy user: Once every three months
Contact the Trojan Repair Centre for advice on suggested lubricants.
Attention: All repairs to be executed by a qualied Trojan technician in order to keep your warranty in tact.
To avoid slipping during running, the belt should not be loose; for avoiding the more abrasion between the roller
and belt and maintain the machine’s good running, the belt should not be too tight. You can adjust the distance
between deck and belt, the belt should be away from the deck by ± 50 - 75 mm on both sides.
#22M07T003 TR310 TREADMILL - USER MANUAL.indd 29 2022/08/29 3:27 PM
To Next Page
Loading...
