10
ASSEMBLY STEPS
1. PREPARATION
• Before assembling make sure that you will have enough space around the item.
• Use the supplied parts and hardware for the assembly.
• Before assembling, please check whether all the required parts have been supplied as per the exploded
drawing on the opposite page.
STEP 1:
Open the carton and unpack the
Main Frame (1). Make sure the
surface that you are working on is
level.
STEP 2:
Start by lifting the Left and Right Handle
attached to the Console Frame as shown
in the direction of the arrows. Lock the
Left and Right Handles into place using
the #5 Allen Wrench (12), 1 Bolt M8 x 42
mm (70), and 1 Lock Washer M8 (64).
Fasten the Left upright tube (3) to the
Main Frame (1) using the #5 Allen wrench
(12), 1 Bolt M8 x 42 (70), and 1 Lock
Fasten the Right upright tube (54) to the
Main Frame (1) using the #5 Allen wrench
(12), 1 Bolt M8 x 16 (51) and 1 Lock washer
M8 (64).
washer M8 (64).
STEP 1
STEP 2
#22M07T003 TR310 TREADMILL - USER MANUAL.indd 10 2022/08/29 3:27 PM
To Next Page
Loading...
