Trojan TR310 - Computer Bracket Installation; Securing Console and Covers

11
ASSEMBLY STEPS
STEP 3:
Support the Computer Bracket (5).
Fasten the Computer Bracket (5) to the
Right Upright Tube (54) using the #5
Allen Wrench (12), 1 Bolt M8 x 16 mm (51)
and 1 Lock Washer M8 (64).
Fasten the Computer Bracket (5) to the
Left Upright Tube (3) using the #5 Allen
Wrench (12), 1 Bolt M8 x 16 mm (51) and
1 Lock Washer M8 (64).
STEP 4:
Secure the Upright Bracket Cover (33)
to both the Left Upright Tube (3) and
the Right Upright Tube (54).
Adjust the Console Screen (48) to the
desired angle.
Note: Hold the uprights with one
hand for support and to avoid possible
injury.
STEP 3
STEP 4
#22M07T003 TR310 TREADMILL - USER MANUAL.indd 11 2022/08/29 3:27 PM