Trojan TR310 - Base Cover and Safety Key Attachment

12
ASSEMBLY STEPS
STEP 5:
Fasten the Right Base Cover (84) to
the Right Upright Tube (54) using
the Wrench Screwdriver (73) and 2
Screws ST4.2 x 19 mm (60)
Fasten the Left Base Cover (83)
to the Left Upright Tube (3) using
the Wrench Screwdriver (73) and 2
Screws ST4.2 x 19 mm (60).
STEP 6:
Attach the Safety Key (71) to the Console.
STEP 5
STEP 6
#22M07T003 TR310 TREADMILL - USER MANUAL.indd 12 2022/08/29 3:27 PM