Use the arrow keys to scroll through the project names
displayed on the first line. When the gauge displays the
desired project, press
〈ENTER/START〉.
For either selection, the gauge displays:
The 32 Column Report option is formatted for a standard
printer width. This format is recommended when outputting
the data to a printer. The Spreadsheet option is sent in a
comma-delimited format, which can then be imported easily
into a spreadsheet program, such as Microsoft Excel. The
information output using the Spreadsheet option is shown on
page 5-10.
The gauge prints (or uploads) the project and returns to the
Project menu shown on page 5-2. Press the
〈ESC〉 key to
return to the Ready screen.
NOTE
The following information pertains ONLY to software
versions 2.11 or later on page 5-9.
1.
32 Col umn Repor t
2.
Spr eadsheet
Pr ess # t o Sel ect
To Next Page
Loading...
