What to do if my True Treadmill shows Fault SC05: Motor Over Speed?
A 'Motor Over Speed' fault on your True Treadmill can be triggered by a few things. High friction between the belt and deck may be the cause, so lubricating the treadbelt is a good first step. Make sure that the AC line voltage is correct. If the speed sensor is dirty or misaligned, it is best to contact your dealer or TRUE service.
Why does my True Treadmill display Fault SC06: Motor Acceleration Fault?
A 'Motor Acceleration Fault' on your True Treadmill can occur for a few reasons. If the user is holding the belt back, stop doing that. High friction between the belt and deck can also cause this issue, so lubricating the treadbelt may help. If the speed sensor is dirty or misaligned, further assistance may be needed.
What to do if my True Treadmill shows Fault SC04: Motor Under Speed?
If your True Treadmill displays a 'Motor Under Speed' fault, it could be due to several reasons. High friction between the belt and deck is a common cause, so try lubricating the treadbelt. Also, check the tension of both the drive belt and the walking belt. Ensure that the AC line voltage is adequate. If the speed sensor is dirty or misaligned, it is best to contact your dealer or TRUE service.
What causes Fault CN08 Calibration Failed on True CS400 Elliptical Trainer?
If your True Elliptical Trainer shows 'Fault CN08: Calibration Failed - Lower Limit Not Reached', it might be incorrectly configured as a treadmill. Try reconfiguring the console.
General| Display Type | LCD |
|---|---|
| Programs | 12 |
| Heart Rate Monitoring | Contact and wireless |
| Maximum User Weight | 400 lbs |
| Drive System | Front |
Critical safety instructions for treadmill operation, setup, and general use.
Explains the use of the safety key and proper grounding for electrical safety.
Details electrical requirements and potential hazards related to power supply.
Information on warning labels and adherence to regulatory standards.
Lists frame components and hardware required before starting assembly.
Step-by-step guide for assembling the treadmill from unpackaged parts.
Identifies and labels the key external parts of the CS400 treadmill.
Explains heart rate tracking via grips/straps and Heart Rate Control workouts.
Details various preset workout programs available on the console.
Introduces scenic video-enhanced workouts for an immersive experience.
Identifies and describes the main components and features of the Transcend console.
Guides users on navigating the touchscreen interface and its various functions.
Covers Web Browser, iPod Integration, Bluetooth Audio, and TV Controls.
Explains service mode, setup, calibration, and other advanced console settings.
Identifies console features and guides basic navigation and operation.
Covers service mode, setup, calibration, and other advanced settings.
Identifies console features and guides basic navigation and operation.
Covers service mode, setup, calibration, and other advanced settings.
Identifies console features and guides basic navigation and operation.
Covers maintenance mode, calibration, and diagnostics.
Provides instructions for routine cleaning, inspection, and safety during maintenance.
Details procedures for adjusting the running belt's alignment and tension.
Instructions for lubricating the belt/deck and leveling the treadmill.
Recommends quarterly maintenance tasks performed by a qualified technician.
Information on how to contact TRUE Fitness for support and sales inquiries.
Procedures for reporting damages that occur during shipment.
A guide to diagnosing and resolving common treadmill malfunctions.
Lists detailed technical specifications, dimensions, and features of the CS400.
Outlines the terms, conditions, coverage, and exclusions of the commercial warranty.
Instructions on how to register the product to validate the warranty.
To Next Page
