TSC Alpha-30L

38
Power Manager
Setup the brightness for display, standby mode, display turns off time and
sleep mode.
Brightness: 50
Standby Mode: ON
Display turns off after: 120 sec.
Sleep Mode: OFF
Date & Time
Setup the date and time on display.
N/A
Security
Set the password for locking the menu. The default password is 8888.
Disable
Printer Head Maintn
Check print head status and to set the settings for print head care.
Item
Description
Warning
To enable/disable the print head clean warning. If
enable this feature, once print head has been
reached the setting mileage then the warning icon
will be shown on printer UI for reminding user to
clean the print head. The default setting is disable.
Reset Counter
To reset the print head clean warning mileage after
cleaned print head.
Interval
To set the expected mileage for reminding user to
clean the print head. Enable the “TPH warning lock”
for this function. The default setting is 1 km.
Disable
Key Sound
This feature is used to ON/OFF the printer key sound
ON
Contact us
This feature is used to check the contact information for tech support service
N/A