TSC MB241 Series - Sensor

56
6.4 Sensor
The setting options in the Sensor menu allows users to calibrate the printer based on what kind of the media they want to use. It is recommended to run the
sensor calibration anytime you use a different media.
Item
Description
Default
Auto Calibration
Set the media sensor type and calibrate the selected sensor automatically.
 Gap
 Black Mark
 Continuous
N/A
Preprint Calibration
Runs the calibration automatically when using the preprinted labels.
 Gap
 Black Mark
N/A
Manual Calibration
In case Auto Calibration does not work, please use “Manual” function to set the paper length and
gap/black mark size to complete the calibration setting.
 Gap
N/A
Sensor
Auto Calibration
Preprint Calibration
Manual Calibration
Threshold Detect
Maximum Length
Advanced