TSC MB241 Series - Page 66

62
Item
Description
Default
Language
Switch the language on display.
English
Printer Information
Check the printer’s serial number, printed mileage (m), printed labels (pcs) and cutting counter.
N/A
Initialization
Reset printer settings to factory defaults.
N/A
Vertical Length Adjustment
Turn on/off the Vertical Length Adjustment function.
OFF
Vertical Percentage
Adjust the label length. Setting range: 90 to 115%.
Note: This subsection will only be visible when the “Vertical Length Adjustment” item is turned on.
100
Display Brightness
Set the brightness for display. Setting range: 0 to 100.
50
Display Orientation
Set the orientation for the display. Setting options: 0 / 180.
0
Touchscreen Calibration
Calibrate the touchscreen for best result.
N/A
Date & Time
Setup the date and time on display.
 Date Format: Set the date display format. (YYYY/MM/DD, DD/MM/YYYY, MM/DD/YYYY , YYYY-
MM-DD, DD-MM-YYYY, MM-DD-YYYY)
 Date: Adjust the date.
 Time Format: Set the time display format. (12 hr/ 24 hr)
 Time: Set the time.
N/A
Security
Set the password for locking the menu and the favorites. Default password: 8888.
Disable
Ribbon Low Warning
Set the warning for ribbon low. For example, if setting value is 30m, when ribbon capacity was lower
than 30m, the number of meters remaining next to the icon ( 30m) will be shown in red. Setting
range: 10 to 100 m.
30m