TSC TDP-225 Series - Loading the Media in Peel-Off Mode (Option)

10
3.4 Loading the Media in Peel-off Mode (Option)
1. Refer to section 3.2 to
load the media. Open
the top cover and peel-
off panel after
calibrating the sensor.
3. Lead the media through the
backing paper opening
beneath the peel-off roller.
2. Push the peel-off panel
back to the printer.
3. Close the top cover gently
and make sure the cover
latches securely, calibrating
the printer by hardware or
software. (Refer to Chp.4&5)