TSC TDP-225 Series User Manual

11
3.5 Loading the Media in Cutter Mode (Option)
1. Refer to section 3.2 to load the media.
2. Lead the media through the cutter paper opening.
4. Close the top cover gently, calibrating the printer by
hardware or software. (Refer to Chp.4&5)

TSC TDP-225 Series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 DPI
Memory	8 MB Flash
Processor	32-bit RISC
Interface	USB 2.0
Power Supply	100-240V AC, 50/60Hz
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-40°F to 140°F (-20°C to 60°C)
Label Width	60 mm (2.36")