TSC TDP-225 Series User Manual

23
6. TroubleShooting
The following guide lists the most common problems that may be encountered when operating this bar code printer. If the printer
still does not function after all suggested solutions have been invoked, please contact the Customer Service Department of your
purchased reseller or distributor for assistance.
LED Status
This section lists the common problems that according to the LED status and other problems you may encounter when operating
the printer. Also, it provides solutions.
LED Status / Color
Printer Status
Possible Cause
Recovery Procedure
OFF
No response
No power
* Turn on the power switch.
* Check if the green LED is lit on power supply. If it is not lit on,
power supply is broken.
* Check both power connections from the power cord to the
power supply and from the power supply to the printer power
jack if they are connected securely.
Solid Green
ON
The printer is ready to use
* No action necessary.
Green with blinking
Pause
The printer is paused
* Press the FEED button to resume for printing.
Red with blinking
Error
The out of label or the printer
setting is not correct
1. Out of label
* Load a roll of label and follow the instructions in loading the
media then press the FEED button to resume for printing.
2. Printer setting is not correct
* Initialize the printer.

TSC TDP-225 Series Specifications

General

Brand	TSC
Model	TDP-225 Series
Category	Barcode Reader
Language	English