TSC TDP-244 Series User Manual

32
Dump mode
Printer will enter dump mode after printing printer configuration. In the dump mode, all
characters will be printed in 2 columns as following. The left side characters are received
from your system and right side data are the corresponding hexadecimal value of the
characters. It allows users or engineers to verify and debug the program.
Dump mode printout
Note：
Turn off and on the power switch to reset the printer for normal printing.

TSC TDP-244 Series Specifications

General

Brand	TSC
Model	TDP-244 Series
Category	Barcode Reader
Language	English