TSC TE210 Series User Manual

2
1.2 Product Features
1.2.1 Printer Standard Features
The printer offers the following standard features.
Product standard feature
TE200
(203 dpi
model)
TE300
(300 dpi
model)
TE210
(203 dpi
model)
TE310
(300 dpi
model)
Thermal transfer printing
○
○
○
○
Direct thermal printing
○
○
○
○
Plastic
○
○
○
○
Gap sensor
○
○
○
○
Reflective, full-range moveable black mark sensor
○
○
○
○
Ribbon sensor
○
○
○
○
Head open sensor
○
○
○
○
USB 2.0 (Hi-Speed) interface
○
○
○
○
16 MB DRAM memory
○
○
-
-
64 MB DRAM memory
-
-
○
○
8 MB Flash memory
○
○
-
-
128 MB Flash memory
-
-
○
○
SD card reader (Reserve a PIN connector for updating
firmware by card when doing maintenance.)
-
-
-
-
RTC
-
-
○
○
BUZZER
-
-
○
○
One button for feed and pause
○
○
○
○
One LED indicator for 3 colors
○
○
○
○
Standard industry emulations right out of the box including
Eltron
®
and Zebra
®
language support
○
○
○
○
Internal 8 alpha-numeric bitmap fonts
○
○
○
○
Fonts and bar codes can be printed in any one of the four
directions (0, 90,180, 270 degrees)
○
○
○
○
Internal Monotype Imaging® true type font engine with one
CG Triumvirate Bold Condensed scalable font
○
○
○
○
Downloadable fonts from PC to printer memory
○
○
○
○
Downloadable firmware upgrades
○
○
○
○

TSC TE210 Series Specifications

General

Resolution	203 DPI
Print Speed	6 IPS
Print Method	Thermal transfer / Direct thermal
Processor	32-bit RISC CPU
Interface	USB 2.0, RS-232, Ethernet
Scan Rate	N/A (Barcode printer, not a barcode reader)
Barcode Resolution	N/A (Barcode printer, not a barcode reader)
Supported Barcodes	Code 39, Code 128, UPC-A, UPC-E, EAN-13, EAN-8, Interleaved 2 of 5, Codabar, POSTNET
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)
Humidity	25 ~ 85% non-condensing (Operating)
Power Consumption	100-240V AC, 50/60Hz