TSC TE210 Series User Manual

17
3.3.2 External Label Roll Mount Installation (Option)
1. Attach the extended plate on the
bottom of the printer.
2. Insert a 3” (or 1”) label spindle into a
paper roll. Then, install it on the
external paper roll mount.
3. Feed the media through the rear
external label entrance chute.
1” label spindle
3” label spindle

TSC TE210 Series Specifications

General

Resolution	203 DPI
Print Speed	6 IPS
Print Method	Thermal transfer / Direct thermal
Processor	32-bit RISC CPU
Interface	USB 2.0, RS-232, Ethernet
Scan Rate	N/A (Barcode printer, not a barcode reader)
Barcode Resolution	N/A (Barcode printer, not a barcode reader)
Supported Barcodes	Code 39, Code 128, UPC-A, UPC-E, EAN-13, EAN-8, Interleaved 2 of 5, Codabar, POSTNET
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)
Humidity	25 ~ 85% non-condensing (Operating)
Power Consumption	100-240V AC, 50/60Hz