TSC TH240 Series User Manual

27
5. Orient the core adapter as indicated and then insert the core
adapter into the ribbon core.
NOTE: This step is only applicable to the 1-inch ribbon core. Skip
this step if the ribbon features a 0.5-inch core.
6. Repeat the procedures described in step 4 to load the ribbon into
its compartment.
7. Pull upward the adhesive strip on front side of the ribbon roll.
8. Carefully adhere the adhesive strip on the rewind paper core.
R
L

TSC TH240 Series Specifications

General

Brand	TSC
Model	TH240 Series
Category	Barcode Reader
Language	English