TSC TH240 Series User Manual

69
Item
Description
Default
Manual Calibration
If Auto Calibration cannot determine the media type and complete the calibration, it is
recommended to use Manual Calibration. After installing the media you want to use, follow the
on-screen instructions to complete the calibration.
 Gap
 Black Mark
 Continuous
Threshold Detect
Sets the sensor’s sensitivity. Setting options: Auto / Fixed.
Auto
Maximum Length
Specifies the maximum length for label calibration. Setting range: 1 to 9999 mm
253
Advanced
Specifies the minimum label length and the maximum gap or black mark length before running
Auto Calibration.
 Min. Paper (Setting range: 0 to 999 mm).
 Max. Gap/Mark (Setting range: 0 to 999 mm).
0

TSC TH240 Series Specifications

General

Brand	TSC
Model	TH240 Series
Category	Barcode Reader
Language	English