5. TROUBLE SHOOTING
5.1 Error Messages
Syntax Error:
The command format is incorrect. Check user‟s manual to be sure.
The serial port setting is incorrect. Check DIP switch and reset the printer.
Out of Range:
Numeric input is too large to be processed.
The input string is too long to be stored.
The size of the text of bar code exceeds that of the label.
Download Error:
The format of the downloaded file is incorrect.
There is not enough memory to store the file.
Stack Overflow:
Program contains too complex mathematical expressions. Divide into several expressions.
There is too much nested routine.
Memory Error:
Too many variables defined.
RS-232 Error:
The serial port setting is incorrect.
File Not Found:
Cannot open the file specified. Download the file again.
Type Mismatch:
Variable type mismatch.
Gap Not Found:
Cannot detect label edge. Calibrate the backing paper again.
Clock Access Error:
Can not read from/write to the clock.
To Next Page
Loading...
Need help?
General
