Operation 3-25
Field Description
Save
If you select a name in the box (highlighted) when
you select Save, the recipe is saved over the
selected file name (no dialog pops up asking for a
file name). If no name is selected (highlighted), then
you are asked for a file name and no Recipe name
is currently selected.
The settings/parameters that are saved include:
For each channel (1-6):
• Alarm setting (on/off)
• Alarm threshold (value)
• Channel setting (enabled/disabled)
• Channel threshold (value)
Sample Timing settings
• Count mode
• Count total
• Start delay (in secs)
• Hold delay (in secs)
• Sample time (in secs)
Count Mode/Units Settings
• Display normalized
• Units (count, ft
3
or m
3
)
• Cumulative/Differential
• Volume units
Printing settings
• Auto print and mode
• Print cumulative/differential
• Print reverse setting (if supported)
•
Print model, separator, serial number
Save As
When you select Save As, a new window opens
that lets you enter a name for the recipe you want
to save.
Load
Highlight the recipe you want to load and press
Load. The settings/parameters are reset to the
values of that recipe.
Delete
Highlight the recipe you want to delete and press
Delete. The recipe is deleted.
To Next Page
Loading...
