TuffStuff CLH-300 - Rail Wheel Adjustment Procedures; Step 1: Loosen Fasteners for Adjustment

CLH-300 Horizontal Plate Load Leg Press/Hack Squatwww.tu stu tness.com22
Rail Wheel Adjustment Step 1
STEP 6 LOOSEN SCREW
STEP 1 LOOSEN SCREW STEP 2 LOOSEN NUT
STEP 3 LOOSEN SCREW
STEP 5 LOOSEN NUT
STEP 4 LOOSEN SCREW
NOTE: 1. REPEAT THESE STEPS ON A NEEDED BASIS WHEN THE CARRIAGE FEELS LOOSE ON THE RAILS.