TurboChef ENCORE Owner's Manual

INFO MODE
11
Info Mode
To access the Info Mode, press the “i” key when
the oven is off or cooling down. There are two
Info Mode screens – press the Up or Down key to
switch between them.
Info 1 screen:
Info 2 screen:
Last Temperature Selected
From the Info 1 screen, the last temperature set
point selected to cook is displayed in the top-left
corner of the screen (SP=).
Serial Number
The oven serial number is shown on the Info 1 screen.
Menu Version
The oven menu version is shown on the Info 1 screen.
Firmware Version
The oven firmware version is shown on the Info 1
screen.
Cook Counter/Time Logs
From the Info 1 screen, press the key adjacent to
“Counts Scroll”:
- Once to display the cook counter.
- Twice to display total cook time.
- Three times to display total magnetron time.
- Four times to display total “oven on” time.
Voltage - View Incoming
Incoming voltage is shown on the Info 1 screen.
Fault Log
From the Info 1 screen, select “Fault Log.” To view
time stamps of each fault occurrence, press the soft
key adjacent to the fault code.
Service Numbers
From the Info 1 screen, select “Service Numbers”
to view TurboChef contact information.
Test Mode
From the Info 2 screen, select “Test Mode” to test
oven components. This mode should only be used
by qualified service technicians, unless otherwise
instructed by TurboChef.
Set Options
From the Info 2 screen, select “Set Options” to
access the Options screen. When prompted, enter
the password 9 4 2 8 and press the Enter key.
Light Ring ON/OFF:
The light ring provides visual cues in regards to oven
operation and how much cook time is remaining.
Cook More ON/OFF:
The Cook More option controls whether or not the
three “cook more” keys function. This option must
be enabled in order to cook an item beyond its
original cook time (see page 10 for details).
Edit Mode ON/OFF:
The Edit Mode allows the operator to change cook
settings for each item, including item and group
names. See pages 15-16 for more details. Turning
“Edit Mode” off will prevent the operator from
changing menu settings.
SP = 500F
FIRMWARE VERSION
MENU VERSION
SERIAL NUMBER
COUNTS SCROLL
SERVICE NUMBERS
FAULT LOGS
VAC = 208
Info 1
TEST MODE
SET DATE/TIME 01/01/00 13:23:05
SET LANGUAGE
SET OPTIONS
LOAD MENU
EC TEMP 80F
SOUND -7-
Info 2
EDIT MODE OFF
COOK MORE ON
LOAD MENU ON
AUTO ON OFF
SET OPTIONS
AUTO OFF OFF
NET WORK SETUP
DEMO MODE OFF

TurboChef ENCORE Specifications

General

Model	ENCORE
Control Type	Touchscreen
Ventilation	Ventless
Exterior Finish	Stainless Steel
Wattage	3600 W
Category	Oven
Cooking Technology	Microwave
Power Requirements	208-240V, 60Hz
Cavity Volume	1.0 cu ft
Temperature Range	500°F