Setting
Setting RFID interfaces via the web server
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 175
Example: Executing a read command
In the following example, 8 bytes of a tag are read by a read/write head connected to channel 0
of the interface.
Click Local I/O Ò Output in the navigation bar on the left of the screen.
Select RFID channel 0.
Enter the number of bytes to be read in the Length entry field (here: 8).
Select the read command via the Command code drop-down menu: 0x0002 Read.
a The read command is sent.
Fig.85: Setting the read command in the web server
To Next Page
Loading...