turck TBEN-S2-2RFID-4DXP - Setting Module Parameters; PROFINET Mapping

Commissioning
Connecting the device to a PROFINET master using the TIA Portal
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 83
7.4.6 Setting module parameters
 Choose Device view Ò Device overview.
 Select the module to be set.
 Click Properties Ò General Ò Module parameters.
 Set the Station parameters.
Fig.72: Setting module parameters
7.4.7 PROFINET mapping
The PROFINET mapping is the same as the data mapping described in the chapter “Setting”.