turck TBEN-S2-2RFID-4DXP - Defining Modbus Channels (Registers)

Commissioning
Connecting the device to a Modbus master with CODESYS
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 45
7.2.5 Defining Modbus channels (registers)
Defining channel 0 (input data)
 Double-click the Modbus TCP slave.
 In the Modbus slave channel tab, select Add channel.
 Enter the following values:
n Name of channel
n Access type: Read holding registers
n Offset: 0x0000
n Length: 64 register (128 bytes)
 Confirm with OK.
Fig.43: Defining READ registers