Commissioning
Connecting the device to a PROFINET master using the TIA Portal
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 76
7.4 Connecting the device to a PROFINET master using the TIA Portal
The following example describes the connection of the device to a Siemens controller in
PROFINET with the SIMATIC STEP7 Professional V13 programming software (TIA Portal).
Hardware used
This example uses the following hardware components:
n Siemens S7-1500 controller
n TBEN-S2-2RFID-4DXP block module
n HF read/write head TN-Q80-H1147
Software used
This example uses the following software:
n SIMATIC STEP7 Professional V13 (TIA Portal)
n GSDML file for TBEN-S2-2RFID-4DXP (download free of charge from www.turck.com)
Requirements
n The programming software has been opened.
n A new project has been created.
n The controller has been added to the project.
To Next Page
Loading...