turck TBEN-S2-2RFID-4DXP - Setting

Setting
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 84
8 Setting
The device can be controlled, read and set via parameter data, process input data, process out-
put data and diagnostic data. The following table shows the data mapping:
Slot Channel Parameter data Process input data Process output data Diagnostic data
Bytes Meaning Bytes Meaning Bytes Meaning
0 GW 0…1 Parameters
GW
0…1 Diagnostics
GW
1 0 0…31 Parameters
RFID
0…23 Input data
RFID
0…23 Output data
RFID
0…36 RFID
diagnostics
2 32…33 Length of
read data
24…151 Read data
3 34…35 Length of
write data
24…151 Write data
4 1 36…67 Parameters
RFID
152…175 Input data
RFID
152…175 Output data
RFID
36…76 RFID
diagnostics
5 68…69 Length of
read data
176…303 Read data
6 70…71 Length of
write data
176…303 Write data
7 0 304…339 Diagnostics
RFID
channel 0
1 340…375 Diagnostics
RFID
channel 1
8 4…7 72…73 Parameters
DXP
376…377 Input data
DXP
304…305 Output data
DXP
72…73 DXP
diagnostics
9 4…7 378…379 Error mes-
sages DXP
10 4 74…75 Extended
DXP settings
11 5 76…77 Extended
DXP settings
12 6 78…79 Extended
DXP settings
13 7 80…81 Extended
DXP settings
14 Module
status
380…381 Module
status