Operation
Software diagnostic messages
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 246
9.15.3 Diagnostic messages — digital channels
Byte no. Bit
7 6 5 4 3 2 1 0
0 VAUX VAUX
1 ERR7 ERR6 ERR5 ERR4
Meaning of the diagnostic bits
Designation Meaning
VAUX Overvoltage VAUX
ERR… Error message on channel x
9.15.4 Diagnostic messages — module status
Byte no. Bit
7 6 5 4 3 2 1 0
0 V2 ARGEE DIAG
1 FCE COM V1
Meaning of the diagnostic bits
Designation Meaning
V2 Undervoltage V2
ARGEE ARGEE program active
DIAG Module diagnostics available
FCE DTM active in Force mode
COM Internal error
V1 Undervoltage V1