Setting
Setting RFID interfaces with the RFID PC Demo software for Modbus TCP
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 193
Example: Executing a command in bus mode
In the following example, the read/write head with address 1 is to read 8 bytes from a tag in HF
bus mode. Two read/write heads are connected to channel 0 of the interface.
Channel 0 Ò Parameters Ò Operating mode: From drop-down menu 3: Select HF bus
mode.
Click Confirm.
Fig.107: Setting HF bus mode
To Next Page
Loading...