Setting
Setting RFID interfaces with the RFID PC Demo software for Modbus TCP
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 196
Channel 0 Ò Read/Write Ò Command code: Select the read command (0x0002 Read).
Enter the length of the read data (here: 8).
Enter the read/write head address in the Antenna number field (here: 1).
Click Confirm.
Fig.111: HF bus mode — setting a read command
To Next Page
Loading...