Operation
Reading error codes
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 253
Error code (hex.) Error code (dec.) Meaning
0xD106 53510 Error with the tag function
0xF0… 61… ISO -15693 error
0xF001 61441 ISO -15693 error: The command is not implemented in this device
0xF002 61442 ISO -15693 error: Command not detected, e.g. incorrect input format
0xF003 61443 ISO -15693 error: Command option not supported
0xF00F 61455 ISO-15693 error: undefined error
0xF010 61456 ISO-15693 error: Addressed memory area not available
0xF011 61457 ISO-15693 error: Addressed memory area locked
0xF012 61458 ISO-15693 error: Addressed memory area locked and not writable
0xF013 61459 ISO -15693 error: Write operation not successful
0xF014 61460 ISO-15693 error: Addressed memory area could not be locked
0xF0A0…0xF0DF 61600…61663 Air interface error
0xF101 61697 Air interface error: CRC error
0xF102 61698 Air interface error: Timeout
0xF104 61699 Air interface error: HF tag error
0xF108 61704 Air interface error: HF tag outside of the detection range, before all com-
mands could be executed
0xF110 61712 Air interface error: Tag does not have the expected UID.
0xF201 61953 HF read/write head faulty
0xF202 61954 HF read/write head: Error in command execution
0xF204 61956 HF read/write head: Transmission window, check syntax
0xF208 61960 Power supply of the HF read/write head too low
0xF20A 61962 HF read/write head: Command code unknown
0xF8… 63… UHF read/write head error
0xF820 63520 UHF read/write head: The command is not implemented in this device
0xF821 63521 UHF read/write head: unspecified error
0xF822 63522 UHF read/write head: A valid password is expected before the command
is accepted.
0xF824 63524 UHF read/write head: Read operation not possible (e.g. invalid tag)
0xF825 63525 UHF read/write head: Write operation not possible (e.g. tag can only be
read)
0xF826 63526 UHF read/write head: Verify after write operation failed
0xF827 63527 UHF read/write head: Access to unknown address (e.g. memory area out-
side of range)
0xF828 63528 UHF read/write head: The data to be sent is not valid.
0xF82A 63530 UHF read/write head: The command requires a long time for execution.
0xF82C 63532 UHF read/write head: The requested object is not in the persistent
memory.
0xF82D 63533 UHF read/write head: The requested object is not in the volatile memory.
0xF835 63541 UHF read/write head: The command is temporarily not permissible.
To Next Page
Loading...