41
OPERATING THE ATTACHMENT
POSITIONING THE POWER RAKE ANGLE
POSITION THE POWER RAKE
ATTACHMENT STRAIGHT FORWARD FOR
TRANSPORTING AS THIS PROVIDES
MAXIMUM STABILITY.
NOTE:OnlychangethePowerRakeangle whenthe
machine is on a level surface.
NOTE: Left and right are determined by standing
behind the machine facing the direction of travel.
58
POWER RAKE POSITION
1. Refer to the “Controls” Section for the procedure
to adjust the angle of the Power Rake.
2. Position the Power Rake to the appropriate
position so the debris is discharged as shown.
To Next Page