Turf Teq Sidewinder - Stopping the Power Rake

43
5. Lower the Power Rake to the operating position
by pushing down on the handlebars until the
transport lock lever, A, can be depressed fully,
releasing lock, B, then slowing lower the Power
Raketothegroundasdescribedinthe“Controls”
section.
B
A
62
STOPPING THE POWER RAKE
1. Release the POWER RAKE DRIVE CONTROL
AND BRAKE LEVER, A, as shown. This will
disengage the drive and apply the brake to stop
the Power Rake from turning.
A
63
2. Raise the POWER RAKE to the transport
position by pushing downonthehandlebarsuntil
the transport lock, A, engages bar, B, and holds
the attachment in the transport position as
described in the “Controls” section.
B
A
64