How to fix a Tuttnauer 2340EKA chamber that is not filling?
If the chamber of your Tuttnauer Laboratory Equipment is not filling, check the water level in the reservoir. Also, inspect the bottom of the reservoir for any obstruction blocking the pickup tube. Clean the water sensor and try filling the machine manually using the Manual Inlet key.
Why is the drying cycle taking so long in my Tuttnauer Laboratory Equipment?
If the drying cycle in your Tuttnauer Laboratory Equipment is taking too long, the autoclave may be overloaded. Also, consider replacing the HEPA filter.
Why does the exhaust stage take so long when running a cycle on my Tuttnauer 2340EKA?
If you are running a ‘glassware’ program on your Tuttnauer Laboratory Equipment, this is normal. The slow exhaust will take between 15 and 20 minutes.
Why is there a loud noise coming from the reservoir of my Tuttnauer 2340EKA?
If there is a loud noise coming from the reservoir of your Tuttnauer Laboratory Equipment, the sterilization temperature might be set too high. The maximum setting is 274ºF (134ºC).
How do I fix a Tuttnauer 2340EKA printer that doesn't print?
If the printer of your Tuttnauer Laboratory Equipment does not print, ensure the paper is inserted in the printer. If the printer prints a test printout, the printer is O.K. and there is a problem with the electronics. Contact your dealer to solve the problem. If the printer does not print the test printout, there is a problem with the printer. Contact your dealer to solve the problem.
Lists electrical data, including voltage, amperage, and fuse ratings.
Lists detailed chamber dimensions, volumes, and pressure ratings.
Describes the operation and functions of the control panel keys.
Lists error messages, their causes, and associated safety measures.
Details sterilization parameters and sequence for unwrapped items.
Covers electrical connection, safety, and initial unit configuration.
Outlines daily, weekly, and periodic maintenance tasks.
Covers machine response, heat, water level, and pressure issues.
Addresses issues with exhaust time, door seals, clogged strainers, and drain problems.
Solutions for failing spore tests, wet/burned wraps, instrument rusting, and drying problems.
General| Brand | Tuttnauer |
|---|---|
| Model | 2340EKA |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
