What to do if the Tuttnauer 2340EA-D Laboratory Equipment shows 'No Water'?
If your Tuttnauer Laboratory Equipment displays a 'No Water' message, check and fix the mineral-free water supply. Also, inspect and clean the water inlet filter, and clean the water level electrode.
What to do if Tuttnauer 2340EA-D shows 'Mineral free water reservoir empty'?
If your Tuttnauer Laboratory Equipment displays 'Mineral free water reservoir empty', fill the mineral free water reservoir.
What to do if Tuttnauer 2340EA-D Laboratory Equipment shows 'Power Down'?
If your Tuttnauer Laboratory Equipment displays 'Power Down', turn on the autoclave and wait until it is ready (reaches the safe condition), then perform a new cycle.
What to do if Tuttnauer Laboratory Equipment shows 'Air Error'?
If your Tuttnauer Laboratory Equipment displays 'Air Error' at the end of the cycle, wait until the autoclave reaches atmospheric pressure, then perform a new cycle.
What to do if the Tuttnauer 2340EA-D display is not activated?
If the display of your Tuttnauer Laboratory Equipment is not activated, first turn the main switch on. Then, ensure the power cord is properly connected to both the machine and the power source. Finally, check and fix the electrical power supply.
What to do if Tuttnauer 2340EA-D Laboratory Equipment shows 'Canceled By User'?
If your Tuttnauer Laboratory Equipment displays 'Canceled By User', wait until either 'cycle failed – canceled by user' or 'cycle end – canceled by user' is displayed. After that, perform a new cycle.
What to do if Tuttnauer Laboratory Equipment shows 'Door is open (During the cycle)'?
If your Tuttnauer Laboratory Equipment displays 'Door is open (During the cycle)', close the door to perform a new cycle.
What to do if Tuttnauer 2340EA-D Laboratory Equipment shows 'RTC Error - Please Set Current Date and Time'?
If your Tuttnauer Laboratory Equipment displays 'RTC Error - Please Set Current Date and Time', set the current date and time. If the problem persists, call the technician.
How to fix Tuttnauer 2340EA-D when the printer does not print?
If the printer on your Tuttnauer Laboratory Equipment is not printing, ensure the paper is inserted correctly. Then, switch the machine off and back on. If the printer prints the date and time after restarting, the printer is working correctly.
General| Brand | Tuttnauer |
|---|---|
| Model | 2340EA-D |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
