Why Tuttnauer Laboratory Equipment printer feeds paper continuously?
If the printer feeds paper continuously when the Tuttnauer Laboratory Equipment is switched on, make sure the ‘feed button’ on the printer is not stuck.
Provides essential safety instructions, user training, procedures, and handling of hazardous materials, starting from page 8.
Details on Program 1 for sterilizing unwrapped instruments at 134°C with fast exhaust.
Details on Program 2 for instruments at 121°C with fast exhaust and drying.
Details on Program 3 for waste materials at 121°C with slow exhaust and drying.
Details on Program 4 for liquids at 121°C with slow exhaust, no drying.
Details on Program 5 for liquids at 105°C with slow exhaust, no drying.
Details on Program 6 for materials with cooling at 121°C, no drying.
Functions of the Start/Stop key: starting, stopping, and canceling fail messages.
Messages for Low Temp, Low Heat, and High Temp conditions during operation.
Messages for Low Pres. and High Pres. conditions during operation.
Guidelines for packaging, cleaning instruments, and loading materials correctly into the chamber.
Step-by-step guide for operating the autoclave, including filling, selecting programs, loading, and starting cycles.
General safety precautions and protective equipment required for loading and unloading the autoclave.
Importance of correct loading for efficient air removal, steam penetration, and preventing damage.
Procedures for safely unloading sterilized items, visual inspection, and rejection criteria.
Overview of periodic maintenance to keep the device in good condition and reduce breakdown time.
Step-by-step guide for draining the water reservoir, including safety precautions.
Procedure for cleaning the water strainer, including safety cautions.
Procedure for checking the safety valve for blockage on different models.
Instructions for replacing the door gasket on specific autoclave models.
Troubleshooting steps when the autoclave machine is not responding to commands.
General| Model | 5075EL |
|---|---|
| Chamber Volume | 75 liters |
| Chamber Material | Stainless Steel |
| Sterilization Temperature Range | 105°C - 138°C |
| Power Supply | 50/60Hz |
| Standard Accessories | Tray |
To Next Page